YOU`LL NEED

• 2 brass decorative corners
• 2 clutch pin backs
• 2 pieces of thick fabric scrap (i.e. felt or wool)
• hammer
• cutting pliers
• super glue

STEP 1

Start by drawing 2 lines at 45 degree angles on the inside of each brass corner, creating a small wedge. Use the cutting pliers to cut out the wedges.

STEP 2

Sandwich a brass corner between two pieces of fabric. The fabric will prevent the brass from being dented or nicked by the hammer. Lightly tap the hammer, flatting the edges inwards.

STEP 3

Once you’ve flattened your corners, super glue a clutch pin back to each backside.

STEP 4

Let it dry.

STEP 5

Attach your new collar tips to any shirt!